Vaporesso XROS 3 Pod Vape Kit Overview
The Vaporesso XROS 3 pod vape kit has an integrated 1000mAh battery with inhale activation, which can last up to 48 hours of average use thanks to the AXON chip. Plus, it can be recharged quickly through a USB-C cable. The airflow can be adjusted using the slider on the back of the kit. This switches between a slightly restricted draw and a tight MTL airflow. The built in AXON chip also boosts the flavour with pulse mode, and will automatically adjust the power settings based on the pod fitted.
The Vaporesso XROS 3 Pod Vape Kit comes with two pods which have built in coils for extra convenience. The 0.6ohm pod comes fitted to the battery and works best with 50/50 e-liquid for a restricted DL vape. The 1.0ohm MTL pod comes as a spare and pairs well with nic salt e-liquid for a tighter draw. Both use COREX heating technology which is designed to improve the efficiency of the mesh coil by 50%. This improves both the vapour production and lifespan. To fit the XROS 3 pod simply insert it to the top of the battery and push it firmly in place. The filling port is located under the mouthpiece and can be accessed by snapping off the black drip tip.
How to use the Vaporesso XROS 3
The 1000mAh battery will need to be charged before use. Using USB-C, it should take around an hour to charge using an approved plug as a power source (no laptops, games consoles or power banks etc).
Remove the pod from the battery and then take off the mouthpiece at the top. Fill the pod using the red fill port and then reattach it to the battery. Make sure everything is put back together before you do this.
It is important to prime the coil inside the pod before you use it. We advise leaving it for about 10 minutes to soak in before you vape. This helps the coil absorb the liquid and prevent burnout.
When you have waited 10 minutes, you can turn the XROS 3 on by clicking the button on the battery 5 times quickly. When turned on, you can either press and hold the button to vape, or use the auto draw by simply inhaling on the device.
When new, simply fill the pod with your chosen vape juice and leave it to prime for 5-10 minutes. Once you are ready to use, turn the battery on by clicking the button 5 times quickly. You can try the auto inhale function, or press the fire button if you prefer to create vapour.
Who Should Buy the Vaporesso XROS 3 Pod Vape Kit?
The XROS 3 pod vape is a great starter kit for new vapers as it is easy to use. It also works best with bar salt e-liquid to provide a sweet and intense flavour with every puff. However, it can also be used with 50/50 e-liquid and other nic salt for MTL vaping.
XROS 3 Key features
- COREX heating tech - consistent flavour
- Pulse mode - ensures consistent power output
- Integrated 1000mAh battery
- USB-C fast charging
- Built in AXON chip - improves the performance
- Adjustable airflow - precise inhale control
- Inhale activation
- Built-in mesh coils - for extra convenience
- Includes two pods
- A great starter kit for new vapers
XROS 3 FAQs
XROS 3 Review
Appearance
The XROS 3 pod vape kit is a sleek and stylish looking device that features a matte metal finish. The colours of the kit are dual tone, which is very fancy. Also, the device has a neon battery indicator bar at the bottom which enhances the crisp look of the battery. The face of the device features a fire button and the back has a sliding airflow control. You'll find the USB-C charge port at the bottom of the kit.
Performance
The XROS 3 has a fantastic build quality. Thanks to its 1000mAh battery, I got a solid day and a half to two days out of the battery. Also, the mod charges quickly because of the USB-C input.
The mesh coil in the pod really carries the flavour well and gives off a thick cloud. The draw is noticeably tighter on the 1.0ohm coil compared to the 0.6ohm resistance. This can be made even tighter with the sliding airflow control. That makes this kit really versatile and would suit most MTL and RDL vapers.
The device can be vaped using both the fire button and via auto-draw. I found myself switching between the two depending on the situation, which was very handy.
Ease Of Use
The pods feature a snap off top to access the filling port and have built in mesh coils, making it easy to set up. This kit could only be easier to use if it had pre-filled pods.
Verdict
On the surface, the XROS 3 looks like many of the other pod kits on the market. But the quality of the device sets it out from the crowd. It vapes smoothly and the flavour is consistent. Also, the 1000mAh battery will last most vapers at least a day. Vaporesso is known for its excellent quality and this kit is no exception.
How long do Vaporesso XROS 3 pods last?
XROS 3 pods will last around 2-3 weeks depending on usage. The type of liquid you use will also affect lifespan, with high VG potentially reducing this, and higher PG extending it. 50/50 liquids are usually good choice to balance lifespan with flavour.
How to fill the Vaporesso XROS 3
Refilling is hassle free. Simply remove the top cap off the pod and top up using the red filling port. Once you are finished, you just need to pop the cap back on the pod and carry on vaping.
How to know when the Vaporesso XROS 3 is charged?
When you plug the battery in to charge, the light on the bottom of the battery will light up red. Leave the device to fully charge, which will be indicated by the light turning green. When this happens, you can remove it from the USB-C cable and continue vaping.
Watch our review of the Vaporesso XROS 3. We look at its features and what this kit has to offer
AXON Chip
The intelligent AXON Chip improves the performance of the XROS 3 with pulse mode. This results in a consistently strong flavour while preserving battery life.
Adjustable Airflow
The precise airflow adjustment allows you to quickly switch between a loose and tight airflow. Use the slider on the back of the XROS 3 to select your ideal draw.
COREX Heating Technology
The built in mesh coil uses COREX heating tech to provide a consistent flavour from the first puff until the last. The unique morph-mesh design improves vaping efficiency by 50%.
USB-C Fast Charging
The Vaporesso XROS 3 Pod Vape Kit has USB-C charging, meaning less time waiting and more time vaping.
Kit Contents
- 1 x XROS 3 battery
- 2 x XROS Series Pods
- 1 x USB-C cable
- 1 x User manual
- 1 x Warranty card
